Shelly with its energy measuring devices offers an easy way to Electricity consumption or the feed -in power to transfer to us. You can also use Shelly devices to monitor the production of the balcony power plant or the consumption of your household appliances. It is also possible to control electric loads such as heating rods or the like via the devices of Shelly. Heat pumps can be controlled via the SG-Ready input and a potential-free shelly like the Shelly 1 or Shelly Plus/Pro/Mini 1.

Installation of energy measurement

For energy measurement, the Shelly directly Behind your electricity meter to be installed to capture the entire electricity requirement of your house. When aligning the electricity converter, make sure that negative values ​​are displayed when feeding electricity.

Installation Smart control and consumption measurement of electrical loads and producers

For control, the Shelly must be installed in the power line to your electricity consumer. The current flow can then be regulated by switching on and off the shelly. Control is automated in smart mode. If only electricity consumption or production is to be monitored, the Shelly must be switched on.

The exception here is the monitoring of 3 phase consumption or production equipment. The monitoring takes place with a Shelly 3em or Pro 3EM. This is where the energy flow measurement via measurement converter, which must be installed to the supply line of the device.

Preparation for integration

Around the Shelly To link, you have to go under https://my.shelly.cloud a Put on account and connect your energy measuring device with it. When setting up the shelly, it is important that it too connected to the cloud is.

If your Shelly has not yet been connected to the cloud, you will find this setting option in the area [Internet security] of the device.

Integration

We use an official partner integration for Shelly, which enables you to easily connect your Shelly devices with us and start using your intelligent solar stom.

Click on [Connect device]. You only need user name and password from your Shelly Account. Authorize every device that we can use (select 2x yes) and press on [Save]. Wait a moment until the message [Done] comes. Now the device is connected. Then switch back to our app, here you will now find all connected devices.

Status and counting values ​​are almost Real time transmitted.

Supported guys

Shelly 3em

Shelly Pro 3em

Shelly 1

Shelly 1PM

Shelly Plug

Shelly Plug S

Shelly Plus 1

Shelly Plus 1PM

Shelly Pro 4PM

Shelly Pro 1

Shelly EM

Shelly Pro 3em

Shelly Plus Plug S

Shelly Pro 1PM

Shelly Pro 3

Shelly Pro 2

Shelly Pro 2PM

Shelly 2PM

Shelly Plus 2PM

Shelly 1L

Shelly Plus 1PM Mini

Shelly Plus PM Mini

Shelly Plus 1 Mini