Optimize the charging of your electric vehicle or your wallbox based on the current charging stand of your home battery.
1. Involvement threshold:
- When does the loading process start? As soon as the charging status (SOC) of your Home Batterys reaches the percentage you set, your car or wallbox is automatically switched on and the charging process begins.
2.
- When does the loading process stop? The loading process ends as soon as the SOC of your home battery falls below the percentage you defined.
- Additional charging with reduced performance: Until this SOC value is reached, we gently charge your vehicle with 1 phase - 10 amps or 3 phases - 6 amps (depending on the current number of phase). If your minimum loading capacity is higher, this amper is set.
Example of practical application:
- Your home battery is still too full in the morning: Suppose your home Battery still has a 50% SOC in the morning, but you want to reduce it to 20% in order to save new solar power during the day.
- Combine schedule and SoC plan: Create a schedule that starts, for example, at 6 a.m. and link it to a SoC plan. Set the switch -on threshold to 25% and the switch -off threshold to 20%.
- Intelligent shop: The loading process begins automatically as soon as the memory has more than 25% load and is stopped when it falls to 20%. This is how you use your stored electricity optimally and make space for new solar power.
The smart mode must be activated for this.
The device is also switched on under the discontinued switch-off threshold in the event of a PV excess for self-consumption optimization.