Juice Charger offers for his Juice Charger me 3 An OCPP interface, through which the Wallbox can be read out and controlled. You can load excess PV stream from your solar system into your car via our backend.
Thanks to the integration with us, the wall box can be operated from anywhere and controlled intelligently.
Preparation
To connect the Juice Charger Me3 with us, it is necessary to activate the OCPP backend of the Wallbox.
Before starting the furnishings, you have to use WiFi or LAN your wall box connect to the internet and the Latest updates install.
In order to set up the OCPP baking, access via a web browser is necessary. You usually need the IP address of your wallbox And enter them in the browser line. Instructions for this will also be provided to you by the manufacturer.
🚧Currently only charging solutions are supported with integrated energy measurement!
Furnishings
Ideally, you carry out the setup via a desktop PC, laptop or tablet, since the furnishings are more comfortable here. Add a new wall box with us and choose Juice Charger me3 out of.
If you put on the Wallbox with us, your OCPP-URL will be displayed in the Wallbox menu.
Copy the OCPP-URL And put them in the Juice Charger.

Open your browser and connect to the charging station.

Go to the OCPP menu, put the URL and forgive one Chargepoint ID, this must not "" or underlined "_"

In the following you can check the settings again if there are problems with the charging control. As a rule, however, the required settings are automatically set via the backend after the first connection.


After a restart, the Wallbox automatically connects to us, which can take a few minutes. Maybe a charging process must also be started so that the Wallbox connects us for the first time.
As soon as the connection to your Wallbox is established, it will appear in the dropdown menu under your OCPP URL.

Now you can make the remaining wall box settings and save your wall box.