With its go-e Charger, GO-E offers a cheap and compact wall box that is able to load excess PV stream from your solar system into your car. This wall box is available in several versions: the current model is Gemini (V4), the instructions also work with the predecessor V3.

The go-e charger has an online interface that we can communicate with your wallbox. The automatic phase switching is also supported.

Preparation

The basic prerequisite for the use of the V3 or V4 (Gemini) generation is the corresponding firmware and app version. The firmware version must be at least 56.1. For the app you need at least version 4.1.2 in the go-e charger app at [Settings] Can you see the versions and update if necessary.

On [Above]

The app version is already below

For the firmware version [Firmware] tap

Then you have to activate the cloud connection that the data can be transmitted via the cloud connection. 

On [Settings]

On [Connection]

On [API Settings]

Tilt switch at [Activate the cloud connection] and [Cloud http the asset] press.

Then on [API key] press.

Then one [Generate api key] and then copy

Integration

In order to connect the go-icerania with us and load them with excess solar power, you enter the copied API Key and the 6-digit serial number.

Automatic phase switch

In the automatic phase switch, we use the stored parameters under [Settings] -> [Auto]. Make sure that "Plug in"And the duration of the phase circuit function with your car. Test the phase switching with the go-e App Before you use it with us.