Fox ESS offers with his Wallbox One that is suitable for the dynamic PV surplus shop as well as tax-based taxes.
Die Fox ESS Wallbox has one OCPP Interface that we can communicate with your Wallbox via the Internet.
Preparation
Around the Wallbox Connecting with us is necessary to activate the OCPP backend of the Wallbox.
Before starting the facility, you have to connect your wall box via WLAN to the Internet and install the latest updates. It was tested with the software version 1.20.
In order to set up the OCCP baking, access to the Elite Charger App necessary.
Furnishings
1. Open the Elite Charger app and choose the charging station you want to control. You can also use this app to use the charging station's updates.
2. Click on the "..." and switch to the "Ocpp" menu. Here you insert the OCPP URL from our app, which is shown to you during the furnishings. Set the "security profiles" 3 and choose any "Cponame" e.g. backend. Confirm the specification and continue with the facility by clicking on the back arrow at the top left.

3. Click on the "..." again at the top right and switch to the Settings menu. There you have to adjust the PV link mode to "quick mode" and select the "controlled mode" as a loading mode. This ensures that the control can be carried out via the backend. Loading times must not be activated.

4. Restart the wall box so that all settings are taken over.
5. The Wallbox appears a short time after the restart with us to choose from and you can complete the furnishings.
6. Now you can have your wall box controlled automatically and load cheap solar power into your car!
❗ important The WALLBOX loading process must be via the included RFID card. As a result, the loading process may start briefly, but our app then automatically pauses it if necessary. If you start the loading process via the Elite Charger app, we cannot check the charging process. Under some circumstances, it can happen that the wall box is displayed as offline after the facility, wait Kurz or make a refresh to update the display.