Your Autoaid Wallbox You can connect via the OCPP interface and load excess solar power or control it manually.

Preparation

Around the Cars It is necessary to connect with us to activate the OCPP backend of the Wallbox.

Before starting the facility you have to connect to the internet And install the latest updates. In our experience, the following approach has proven itself:

1. Separate the wall box from the power grid for 10 seconds

2. After the restart, the Wallbox opens a WLAN hotspot

3. Log with the password Admin123 in the WLAN hotspot

4. Open the Browser and give the IP address in the address line (192.168.4.1) the wall box.

5. Then you can use the PINThe one on the Last page of the manual Inserted into the WallBox menu.

6. Press open [Network settings] and carry the Name of your WLANS and the WLAN access data a.

7. Copy the OCPP link now and also add it to the [Network settings] In addition. It is important that the URL with wss:// begins and the Port 443 As shown in the picture, it is supplemented.

8. Behind the URL, the Wallbox complements automatically Your id. Click on [Confirm] and takes over the settings. The wall box is restarted and connects to the backend.

9. Make sure that the load compensation deactivated is.

10. Also note that the jumper "app control" is correctly set. See the following video https://youtube.com/shorts/8RpIeKQWmCA?si=LDW-hlTJQ5eSke68

11. In our app, the Wallbox dives with its Serial number To choose from. If this does not happen, you can also cancel the facility in our app and restart. It can also up to 10 minutes It is time for the wallbox to connect.

⚠️ In order to get the first status from the Wallbox, a charging process may have to be started.