The Open Charge Point Protocol (OCPP) is an application protocol for communication between charging points for electric vehicles and supplementary central management systems (CMS).
The protocol was originally developed by Joury de Reuver and Franc Buve and is now managed by the Open Charge Alliance - a non -profit organization based in the Netherlands.
With OCPP, operators can monitor, control, configure and update e-charging points and also process payments and bills. The protocol is open, patent and license-free.
To your OCPP Wallbox It is necessary to connect with us to activate the OCPP backend of the Wallbox.
Before starting the facility you have to connect to the internet And install the latest updates.
To set up the OCCP backend, access to the Wallbox is necessary.
Tap on Wallbox -> OCPP 1.6.
If you put on the wallbox with us, then you will be your individual in the Wallbox menu OCPP-URL displayed.
You now have to store this link in your wall box. Look at the instructions of your Wallbox, where the link has to be stored. Please make sure that the name of the Wallbox does not contain space "or underlined" _ ". Otherwise the control will not work.
Preparation
Step 1: Select the Orbis network (the network name corresponds to the serial number of the charger).
Step 2: Enter the work password: 12345678 (it is recommended to change the password to a safer password).
Step 3: Open a web browser and enter the following IP address in the address bar: "192.168.4.1". You are now in the web browser access.
Step 4: Go to Communications and change the URL in:
ws://cleverpv-ocpp.azurewebsites.net/ocpp/XXXXX/Seriennummer
A notice: Please add the serial number of the charging station at the end of the URL, according to the "/".
Step 5: Change the connection in 80 and click on Overwrite.
When you have completed this configuration, it can take up to 10 minutes for your wall box to register. As soon as the connection to your Wallbox is established, it will appear in the dropdown under yours OCPP-URL.
Now you can make the remaining wall box settings and save your wall box.
⚠️ In order to get the first status from the Wallbox, a charging process must be started.